# Cartography and the three different ways of making maps cylindrical projection conic projection and

Cylindrical Projection — It is also known as Mercator Projection. One can imagine that a paper to be wrapped as a cylindrical around the globe, tangent to it along the equator.

Differential geometry The German mathematician Carl Friedrich Gauss —in connection with practical problems of surveying and geodesy, initiated the field of differential geometry. Using differential calculushe characterized the intrinsic properties of curves and surfaces. For instance, he showed that the intrinsic curvature of a cylinder is the same as that of a plane, as can be seen by cutting a cylinder along its axis and flattening, but not the same as that of a spherewhich cannot be flattened without distortion.

Instead, they discovered that consistent non-Euclidean geometries exist. Topology Topology, the youngest and most sophisticated branch of geometry, focuses on the properties of geometric objects that remain unchanged upon continuous deformation—shrinking, stretching, and folding, but not tearing.

The continuous development of topology dates fromwhen the Dutch mathematician L. Brouwer — introduced methods generally applicable to the topic. History of geometry The earliest known unambiguous examples of written records—dating from Egypt and Mesopotamia about bce—demonstrate that ancient peoples had already begun to devise mathematical rules and techniques useful for surveying land areas, constructing buildings, and measuring storage containers.

It concludes with a brief discussion of extensions to non-Euclidean and multidimensional geometries in the modern age. Similarly, eagerness to know the volumes of solid figures derived from the need to evaluate tribute, store oil and grain, and build dams and pyramids.

Even the three abstruse geometrical problems of ancient times—to double a cube, trisect an angle, and square a circle, all of which will be discussed later—probably arose from practical matters, from religious ritual, timekeeping, and construction, respectively, in pre-Greek societies of the Mediterranean.

And the main subject of later Greek geometry, the theory of conic sectionsowed its general importance, and perhaps also its origin, to its application to optics and astronomy.

While many ancient individuals, known and unknown, contributed to the subject, none equaled the impact of Euclid and his Elements of geometry, a book now 2, years old and the object of as much painful and painstaking study as the Bible.

Much less is known about Euclidhowever, than about Moses. Euclid wrote not only on geometry but also on astronomy and optics and perhaps also on mechanics and music.

Map makers are called cartographers. There are 3 generally accepted types of map projections. These are cylindrical projections, conic projects and planar projections. Map projections can be constructed to preserve at least one of these properties, though only in a limited way for most. Each projection preserves, compromises, or approximates basic metric properties in different ways. The purpose of the map determines which projection should form the base for the map. Geometry: Geometry, the branch of mathematics concerned with the shape of individual objects, spatial relationships among various objects, and the properties of surrounding space. It is one of the oldest branches of mathematics, having arisen in response to such practical problems as those found in.

Only the Elements, which was extensively copied and translated, has survived intact. What is known about Greek geometry before him comes primarily from bits quoted by Plato and Aristotle and by later mathematicians and commentators.

Among other precious items they preserved are some results and the general approach of Pythagoras c. The Pythagoreans convinced themselves that all things are, or owe their relationships to, numbers. The doctrine gave mathematics supreme importance in the investigation and understanding of the world.

Plato developed a similar view, and philosophers influenced by Pythagoras or Plato often wrote ecstatically about geometry as the key to the interpretation of the universe. Thus ancient geometry gained an association with the sublime to complement its earthy origins and its reputation as the exemplar of precise reasoning.

Finding the right angle Ancient builders and surveyors needed to be able to construct right angles in the field on demand. One way that they could have employed a rope to construct right triangles was to mark a looped rope with knots so that, when held at the knots and pulled tight, the rope must form a right triangle.

## Major branches of geometry

The simplest way to perform the trick is to take a rope that is 12 units long, make a knot 3 units from one end and another 5 units from the other end, and then knot the ends together to form a loop, as shown in the animation.

However, the Egyptian scribes have not left us instructions about these procedures, much less any hint that they knew how to generalize them to obtain the Pythagorean theorem: The required right angles were made by ropes marked to give the triads 3, 4, 5 and 5, 12, In Babylonian clay tablets c.

A right triangle made at random, however, is very unlikely to have all its sides measurable by the same unit—that is, every side a whole-number multiple of some common unit of measurement.

This fact, which came as a shock when discovered by the Pythagoreans, gave rise to the concept and theory of incommensurability. Locating the inaccessible By ancient tradition, Thales of Miletuswho lived before Pythagoras in the 6th century bce, invented a way to measure inaccessible heights, such as the Egyptian pyramids.

Although none of his writings survives, Thales may well have known about a Babylonian observation that for similar triangles triangles having the same shape but not necessarily the same size the length of each corresponding side is increased or decreased by the same multiple.

A determination of the height of a tower using similar triangles is demonstrated in the figure.

A comparison of a Chinese and a Greek geometric theoremThe figure illustrates the equivalence of the Chinese complementary rectangles theorem and the Greek similar triangles theorem. Estimating the wealth A Babylonian cuneiform tablet written some 3, years ago treats problems about dams, wells, water clocks, and excavations.

Ahmesthe scribe who copied and annotated the Rhind papyrus c. Euclid arbitrarily restricted the tools of construction to a straightedge an unmarked ruler and a compass. The restriction made three problems of particular interest to double a cube, to trisect an arbitrary angle, and to square a circle very difficult—in fact, impossible.Conceptual model of a Lambert Conformal Conic map projection (left) and the resulting map (right).

The two thick red lines marking the intersections of the globe and the projection surface (the cone) correspond with two standard parallels on the map. The Hundred Greatest Mathematicians of the Past.

This is the long page, with list and biographies. (Click here for just the List, with links to the r-bridal.com Click here for a . Map projections can be constructed to preserve at least one of these properties, though only in a limited way for most. Each projection preserves, compromises, or approximates basic metric properties in different ways.

The purpose of the map determines which projection should form the base for the map. Start studying Geography Chapter 2.

Learn vocabulary, terms, and more with flashcards, games, and other study tools. There are three ways to portray map scales that are widely used. graphic scale, fractional scale, and verbal scale around the equator like an ordinary cylindrical projection, but then further curves in toward the poles.

A map projection is a systematic transformation of the latitudes and longitudes of locations from the surface of a sphere or an ellipsoid into locations on a plane. Maps cannot be created without map projections.

All map projections necessarily distort the surface in some fashion. Depending on the purpose of the map, some distortions are acceptable and others are not; therefore, different map. climate map give general information about the climate and precipitation (rain and snow) of a region.

Cartographers, or mapmakers, use colors to show different climate or precipitation zones.

Are there 3 main types of map projection